steves bike-gs1200
BMW R1200 GS/GSA
The big GS1200 range of bikes are arguably the most popular of all the adventure bikes and possibly the major influence in the Adventure touring culture we have today so it is only fitting that we have top world class quality products for the king of the adventure world.  

These products below are all top notch cream of the crop items that gives the big GS what it deserves... the very best! Take a look and check out our range of parts that will have you taking your GS to new heights and places you never thought possible.

!

R1200GS/GSA RM2 Steering Damper Kit
!

ALL R1200 GS/GSA

We have put a lot of thought into this product and come up with a very unique way of mounting the RM2 steering damper to the GS, we have utilised the steering stem bolt to link the actuator arm of the steering damper inside the bearing counter bore of the triple clamp, this keeps the linkage system neatly out of the way sealed under the damper unit reducing wear by not being exposed to dirt and moisture. 

04-07 models (black top triple clamp) allows the rider to retain most types of bar risers as long as it is higher than 30mm, meaning that the bar position can be changed and altered to most positions higher than 30mm. If you have not yet installed a bar riser you will need to add this product

08-11 models (silver top triple clamp) will get a 10mm bar lift included in the kit but can also be used with any already existing bar risers you have fitted if you would like more lift than the 10mm included. - DO NOT TICK THE BAR RISER BOX FOR SILVER TOP CLAMP BIKES!

NOTE -This kit is recommended that a knowledgeable BMW workshop does the installation.

R1200GS/GSA Bar Riser
!
Tapered 28.6mm handlebar risers

Will lift handlebars by 30mm. Great for riders that are looking for some extra room in the cockpit! These only lift straight up not forwrds or backwards. Kit includes longer bolts.

Suit - tapered/fat/oversize/28.6mm handlebars

Useful for 2004-2007 models

R1200GS/GSA Slip on Exhaust by Barrett Exhaust
!
Slip on muffler R1200GS
This muffler is 100% made in Australia by Barrett Exhausts using the highest quality materials, the endcap is CNC machined from a solid piece of 6000 series aluminium and allows a removable insert for noise reduction.

Fully rebuildable and all spare parts can be purchased individually - contact for details

R1200GS/GSA Air Filter by Uni Filter
!
R1200 GS/GSA 04-11

Dual pod foam filter with internal support springs and polyurethane flange.  Supplied with two precleaners and reuseable cable ties for fixing to airbox snorkel inlet.  Precleaners provide added filtration and protection in off road conditions as well as prolonging the service interval of the main filter.

Pre cleaners are also available on their own - contact for details